Vox AC4TVMINI Owner's Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 18
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
3
Owners manual
INTRODUCTION
Congratulations on parting with your hard earned cash, and getting yourself the future classic, AC4TVmini!
Even though, historically, VOX has produced an AC4 (a 4 Watt, Single-Ended Combo Amplifier), it was
decided that a mere re-issue was not going to be enough. The original AC4 used the EF86 Preamp
Pentode tube and an EL84 Power Pentode tube. This tube compliment was fine for the 1950s guitarist,
as there was no cascading preamp gain stage. This meant the amplifier would not overdrive well. It was
decided this would not be suitable for the modern day guitarist, as we like to have the option of having
clean, crunch or wonderfully saturated overdrive.
From this, the AC4TVmini was born!
Cosmetically inspired by the VOX AC15H1TV (part of the Heritage Collection), the amplifier features a
Tone control, Volume (Gain) Control and an Output Level Attenuator. This means you can have all the
great overdrive you need at more “neighbour friendly” levels!
Just for good measure, we’ve added an External Speaker Jack allowing you to connect any 16ohm
cabinet (trust us, you have to hear this through a 4 x 12" cab!).
Enjoy!
The VOX R&D team
FRONT PANEL LAYOUT
1
2
3
4
5
6
1. INPUT Jack - Insert Guitar Here!
2. TONE Control - Used to control how bright or dark the overall sound of the amplifier is. Fully
counter-clockwise is darker and fully clockwise is brighter.
3. VOLUME Control - Controls (you guessed it!) the volume of the amplifier. For a cleaner
sound, the knob should be set anywhere before 12 o’clock and for a more aggressive,
overdrive sound... why not crank it!
4. OP LEVEL (Output Level) Control - This control has 3 positions:
a. 4W - This is full output level of 4 watts.
b. 1W - This is 1 watt output level.
c. 1/10W - This is 1/10 watt output level.
An attenuator is used to achieve this, meaning you can crank it to get the saturated overdrive
you require......but keep up neighbour relations, by keeping the relative output level low.
5. Power Switch - Used to power up!
6. Indicator - Used to see power up!
Page view 2
1 2 3 4 5 6 7 8 ... 17 18

Comments to this Manuals

No comments