Vox AC15CC1 Owner's Manual download pdf (Page 5)

8 Ohm: Allows for the following configurations:

1) Set it to this if you connect an extension cabinet. You’ll be running the

internal and external speaker in parallel. The impedance of the extension

cabinet must be 16 Ohms.

2) Set it to this if you connect an external 8 ohm cabinet and disconnect

the internal speaker.

Model AC15CC1X

This has an 8ohm loudspeaker internally fitted and the amplifier must be

set at 8ohm output. This speaker must be disconnected if amplifier is used

with an extension cabinet.

3. Footswitch jack: This is where you connect the supplied VF002 VOX footswitch so you can

turn the Reverb and Tremolo on and off.

4. HT Fuse: This fuse protects your amp should a fault occur with the power. The most

common reason for this fuse to blow is when an output tube becomes

faulty. The correct value of the HT fuse is located on the rear panel of the

amplifier and should only be replaced with one of the same value.

5. Mains Input: This is where the supplied, detachable Mains (power) cord is connected.

The specific mains input voltage rating that your amplifier needs to run at

is located on the rear panel of your amplifier. Before making any connec-

tions or powering up the amplifier, make sure the correct voltage is set. If

you have any doubt, refer to your local VOX dealer.

6. Mains Fuse: This fuse provides an overall safety protection in the event your amplifier

develops and electrical fault. The correct value of the fuse is located on the

rear panel of your amplifier and should only be replaced with one of the

same value.

Specifications

Power Output: 15 Watts RMS into an 8 or 16 ohm loudspeaker load.

Internal speaker: 16 ohm, 12", 30 Watt VOX/Wharfedale Custom—model AC15CC1

8 ohm 12", 15 Watt VOX/Celestion AlniCo Blue—model AC15CC1X

Valve/tube complement:

2 x EL84/6BQ5 & 2 x 12AX7/ECC83.

Rectifier: silicon rectifier with passive SAG circuit.

Mains input: preset 100V or 120V or 230V or 240 V ~ 50 or 60 Hz depending on country

of sale. Please see Rating Plate on rear of amplifier for exact specification.

Mains Fuse value: 250V, T1.6AL for 100V / 250V, T1.25AL for 120V

250V, T630mAL for either 230V & 240V.

Warning!—Replace fuse with same type and rating

HT Fuse: 250V, T250mAL.

Dimensions: 605 x 262 x 440 mm / 23.82" x 10.31" x 17.32"

Weight: AC15CC1: 21.6kg / 47.62 lbs. , AC15CC1X: 21.7kg / 47.84 lbs.

Included items: Power cable, VF002 footswitch

Appearance and specifications of this product are subject to change without notice.

URL = http://www.voxamps.co.uk

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

Vox AC15CC1 Owner's Manual Page 5

Comments to this Manuals

Related products and manuals for Soundbar speakers Vox AC15CC1