Vox DA20 Specifications Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
16
TREMOLO
This effect is based on the highly acclaimed tremolo
circuit found in some guitar amps.
TAP “SPEED” Sets the tremolo speed in a range
of 2.5...10 [Hz].
EDIT 2 “SPEED” This lets you use the knob to make
fine adjustments to the parameter.
EDIT 3 “DEPTH” Adjusts the tremolo depth.
ROTARY
This models a rotary speaker.
TAP “SPEED” Sets the rotational speed of the
speaker in a range of 0.8...10 [Hz].
EDIT 2 “SPEED” This lets you use the knob to make
fine adjustments to the parameter.
EDIT 3 “SENS” By adjusting this parameter you can
make the rotational speed change
automatically in response to the vol-
ume of your guitar. If you use this
function, set the SPEED to a slow
setting.
DELAY
This is a model of one of the most respected ana-
logue tape echo machines ever made. In the original
the “echo” is produced by a playback head and the
exact “delay time” is set by varying the motor speed.
Many professionals prefer these “lo-fi” units because
of the warm, dark echoes they produce.
TAP “TIME” Sets the delay time in a range of
1...1,486 [ms].
EDIT 1 “MIX” Adjust the mix amount of the de-
layed sound.
EDIT 2 “TIME” This lets you use the knob to make
fine adjustments to the parameter.
EDIT 3 “FEEDBACK” Adjusts the amount of feedback.
HINT: In the CHORUS+DELAY combination effect, the
FEEDBACK parameter is already set to the optimal
value.
WARNING! If you crank up the FEEDBACK too much, an
uncontrollable, cascading “runaway” of echoes will oc-
cur. So, use your ears when setting this!
REVERB
A model of the most popular spring reverb system
used in guitar amps.
TAP “TIME” Sets the reverb time in a range of
0.8...8 [seconds].
EDIT 1 “MIX” Adjusts the mix amount of the re-
verb.
EDIT 2 “TIME” This lets you use the knob to adjust
the reverb time.
EDIT 3 “HI DAMP” Adjusts the dampening of the high-
frequency range.
HINT: In combination effects, the TIME and HI DAMP pa-
rameters are already set to optimal values.
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments