Vox VC-12 Specifications download pdf (Page 6)

6. Foot switches [1]–[4], LEDs

The function of these will depend on the mode

that’s selected on the VC-12SV or the settings

of the connected device.

In Channel Select mode, these switches select

channels (the LED of the selected channel will

light).

For details, refer to “Channel Select mode”

(p.7).

In Effect On/Off mode, these switches turn the

pedal effect, modulation effect, delay effect, or

reverb effect on/off individually. (The LED will

be lit for each effect that is on.)

You will also use these switches to select

programs of another bank.

For details, refer to “Effect On/Off mode”

(p.8).

If the connected device is in Manual mode,

these switches will turn the pedal effect,

modulation effect, delay effect, and reverb

effect on/off individually. (The LED will be lit

for each effect that is on.)

For details, refer to “About Manual mode”

(p.9).

7. CHANNEL - FX ON/OFF switch, LED

This switches between Channel Select mode

and Effect On/Off mode.

8. Expression pedal, pedal switch

The expression pedal controls the effect that is

assigned by the connected device. For details

on the effect that will be controlled, refer to the

owner’s manual of the connected device.

The pedal switch is an on/off switch for the

effect that is assigned by the connected device.

The LED located at the upper left of the pedal

will be lit if the effect can be controlled or if the

effect is on.

9. Volume pedal

This controls the volume.

You can choose one of three different volume

change curves. For details, refer to “Volume

pedal curve” (p.11).

Rear panel

1 2

1. VOX BUS MAIN connector

Connect this to another device that has a VOX

BUS connector (or FOOT CONTROLLER

connector).

Power is supplied to the VC-12SV via this

connector.

Use this connector if you’re connecting the VC-

12SV to one device.

Note: You must use the included cable (10 Base-T

straight cable) to make connections. Using another

cable may damage the connected device.

2. VOX BUS SUB connector

If you’re controlling two identical devices,

connect this connector to the sub-device.

The VC-12SV can simultaneously control two

identical devices.

Note: Even if you operate the device that’s con-

nected to this connector, the operations will not be

transmitted to the VC-12SV.

MAIN SUB

to amp to amp

Operations

Power

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

Comments to this Manuals

No comments

Vox VC-12 Specifications Page 6

Comments to this Manuals

Related products and manuals for Music Pedal Vox VC-12