Vox StompLab IIB Specifications download pdf (Page 4)

In Edit mode, use this knob to set the rst parameter of an eect.

Also, when saving a program, use this knob to select the program

location where a set program will be saved (wrien).

3. VALUE 2 knob

In Program select mode, use this knob to adjust the amplier

(AMP/DRIVE) output level.

When making this adjustment, the

program/value display will indicate the output level and the EDIT

LED and Tuner # LED will blink.

In Edit mode, use this knob to set the second parameter of an eect.

4. EDIT button, EDIT LED

Use this buon to switch the Program select mode and the Edit

mode. The modes can be switched each time the buon is pressed.

When in the Edit mode, the EDIT LED will light up.

In Program select mode, the Value lock function turns on when

this buon is pressed and held for 2 seconds and the functionality

of the VALUE 1 and VALUE 2 knobs will be disabled. The Value

lock function is canceled when the buon is pressed and held

again for 2 seconds.

The Value lock function can only be enabled in Program select

mode.

5. Program/Value display

In Program select mode, this indicates the selected program number

and the knob value. When BYPASS/MUTE is active, the display

indicates the name of the note that you’re tuning.

In Edit mode, this indicates the eect abbreviations and parameter

values. Also, this indicates the program number that was selected

as the save location when the program is saved.

Front and rear panel

This section explains the buttons and connectors on the

StompLab II G’s front and rear panels.

Front panel

9 10

1. CATEGORY selector

In Program select mode, use this to select the program genre and

to recall the selected genre of the program.

In Edit mode, use this to select the eect that will be edited.

Also, you can save the seings of an edited eect in a program

when [WRITE] is selected with the selector.

2. VALUE 1 knob

In Program select mode, use this knob to adjust the amplier

(AMP/

DRIVE)

gain. When making this adjustment, the program/value

display will indicate the gain value and the EDIT LED and Tuner

center LED will blink.

1 2 3 4 5 6 7 8 9 ... 67 68

Comments to this Manuals

No comments

Vox StompLab IIB Specifications Page 4

Comments to this Manuals

Related products and manuals for Music Pedal Vox StompLab IIB